Improving Power Factors Helps in Reducing Energy
Improving Power factors in reducing energy is the ultimate goal of any system. Unfortunately, it is where we mostly get stuck. Before we proceed with its exploration in-depth, you shall be aware of the power factor in reality?
Power factor is a number that lies under 0 to 1. The power factor doesn’t have any specific dimensions. It is generally measured by calculating the percentage of real power – denoted as kW to apparent power – indicated as kVA.
Here, Real power is the overall power required to accomplish any task in perfect world conditions. The multiplication of the prevailing current and voltage consumed by the load depicts the Apparent power.
Power factor correction acts as a shield to your system. The power factor doesn’t stay stable and keeps on averting with time. The higher power factor depicts that the system is working effectively where the electrical power is consumed in the best way possible.
When your power factor is equivalent to 1, then you are using your power efficiently. Whereas a power factor comparable to 0.5 states that you are not utilizing your power effectively. On the other hand, the low power factor states that the electrical power isn’t ultimately used to its ultimate potential and unnecessarily increases your expenditures.
Why does the low power factor take place?
Organizations and big manufacturing units often ignore the Increasing Power factor, which results in high energy bills. Low power factors occur because of two central states. These two states are lagging and leading. You need to have explicit knowledge of these two categories to increase power factor energy quickly.
A blend of the various inductive equipment can result in the ‘Lagging’ category of low power factor as mentioned below –
- Arc welders
- Transformers
- Induction motors
- Solenoids
- Fluorescent ballasts Induction loads
- Induction heaters
- DC power supply Rectifiers
- Lifting magnets
On the contrary, the ‘Leading’ category of low power factor is generally due to the fixed capacitors. It usually happens when during the meagre load intervals, fixed capacitors are attached to the network. At this time, the inductive loads are generally turned off as it’s not the significant shifts.
Why Improve Low Power factor?
If the Power factor is low you must improve your power factor in time. Increasing Power factors to reduce energy can make your system operate properly. If not done, it might lead to worsening the overall operating efficiency.
It is because it further drops the voltages and increases the requirement sets for the more extensive conductor. Power factor correction henceforth helps in Increasing Power factors to reduce energy.
Improving the power factor saves you from significant expenditures, capital investments and increases the distribution system performance. As a result, your energy bills reduce, primarily due to the lower power factor penalties.
How does Improving Power Factor help in Reducing Energy?
Improving Power factors in reducing energy is quintessential for every system. Before taking the step of power factor correction, you shall understand the actual reasons that are causing the low power factor.
Once you have examined the root causes of the low power, you can only move forward with applying various techniques that will help you increase power factors to reduce energy. You can perform these techniques either solo or in a combination that fits your current situation the best.
Improving Power factors to reduce energy can be manifested via various strategies. Learn these strategies from the beneath section –
- First of all, the capacitors are required to be installed in the distribution system.
- For lightly loaded motors or idling, you are required to lessen their actual operational power.
- VFD – Variable Frequency Drive Systems are needed to be installed on the motors that are lightly loaded.
- Carry forward the installation process of new motors to be operated somewhere closer to their rated capability.
- It would help reinstate the motors burdened with those pre-programmed to perform operations to their stated capacity.
- Make sure to keep track of the fact that the device’s overall process doesn’t go far from its rated voltage.
Parting words
We are the number 1 brand in the power & energy industry. Our consistent effort of Increasing Power factors to reduce energy has given birth to many positive outcomes. Power factor correction is the decision that you are going to be thankful for forever.
The way it boosts the efficiency of your current system and minimizes your expenditures says all that why you should go for power factor correction. So get the best services from Powermatrix by Improving Power factors to reduce energy.
So save yourself from the unnecessary high energy bills and penalties by taking a step ahead of power factor correction. Reach out to professionals to get a better insight into it. Contact Power Matrix Solutions Today.
